Find Diesel Pump, Fire Pump, Fire Fighting Pump on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

The Latest Product Alerts Send Me

Deutz Water Cooled Diesel Engine (226B Series)

Basic Info

Model No.:  226B

Product Description



Model NO.: 226B


Speed: Speed


Intake Pressure Impulse: Naturally Aspirated


Fuel: Diesel, DIESEL ENGINE


Cylinder Arrangement Form: L


Manufacture: Deutz


Specification: SGS


HS Code: 8408909220




Ignition Mode: Electric Ignition


Cooling Cylinder: Air-Cooled


Piston Movement: Reciprocating


Number of Strokes: Four-Stroke


Number of Cylinders: Multi-Cylinder Machines


Trademark: Deutz


Origin: China


226B Series Deutz Water Cooled Diesel Engine



Features:

1. Cooperated with German Deutz engine company,

2. This engine has good performance in strong power, lower fuel consumption, high reliability.

3. This engine is suitable for Water Pump use ( with PTO), and GENERATOR SET use, and other purposes.

It is widely welcome in overseas market Like South American, Middle east, Africa , Australia and etc.



Performance Table:



Basic data






WEICHAI engine model
D226B-3D TD226B-3D TD226B-4D TD226B-6D TBD226B-6D
Number of Cylinders
3 3 4 6 6
Engine Displacement L 3.117 3.117 4.156 6.234 6.234
Type
in line,four stroke,direct injection,wet cylinder liner
Firing order
1-3-2 1-3-2 1-3-4-2 1-5-3-6-2-4 1-5-3-6-2-4
Bore mm 105 105 105 105 105
Stroke mm 120 120 120 120 120
Compression ratio
16.4 15.5 15.5 15.5 15.5
Aspiration
Natural Turbocharged Turbocharged Turbocharged Turbocharged
Crankshaft rotated direction(Face to flywheel)
Anti-colckwise
Staring Methord
Electronic Motor(DC24V or 12V)
cold start performance without cold start aid ºC -10 -10 -10 -10 -10
with cold start aid ºC -35 -35 -35 -35 -35
Permitted gradient longitudinal /cross ° 25/30 25/30 30/40 20/45 20/45
Engine only Dry weight kg 495 505 545 714 735
Wet weight kg 505.5 515.5 559.5 735 750
Engine with cooling package Dry weight kg 520 530 570 760 775
Wet weight kg 530 540 585 781 790
Performance





Prime Power kW 36 50 70 105 135
Speed at Prime Power r/min 1800 1800 1800 1800 1800
Standby Power kW 40 55.0 77 116 149
Speed at Standby Power r/min 1800 1800 1800 1800 1800
Fan Power Consumption kW 2 2 2 4 4
Mean piston speed at rated speed m/s 7.2 7.2 7.2 7.2 7.2
Torque at Prime Power N.m 191 265.28 371.39 557.08 716.25
Standby Power N.m 210.1 291.81 408.53 612.79 787.88
Effective mean presure at Prime Power kPa 769.97 1069.40 1122.87 1122.87 1443.70
Standby Power kPa 846.97 1176.34 1235.16 1235.16 1588.07
Max combustion pressure MPa ≤18.5
The lowest idle speed r/min 800±50 750±50 750±50 750±50 750±50
Steady Governing Rate
Mechanical type≤5%,Elcctronic≤1.5%
Noise dB(A) ≤105
Lubrication System





lubricating oil consumption g/kWh 0.65 0.67 0.66 0.67 0.67
Oil system capacity including filters
8 8 9.75 14 14
oil sump capacity
7.25 7.25 9 13 13
Oil change intervals/specifications h 250
Oil pressure at Rated speed kPa 300-500
Idle speed kPa ≥100
Max permitted oil temperature ºC ≤120
Oil Pump type
gear pump
Oil filter type
spiral paper element
Oil cooler type
Round plate type
Oil grade
SAE 15W-40 for temp above (-15 degC). SAE 5W-30 for temp below (-15degC).CD/CE/CF class oilRound plate type
Fuel System





Fuel Pump, Model
A Type or AD type A Type or AD type EP9 Type or P7100 type EP9 Type or P7100 type EP9 Type or P7100 type
Type of Governor: Mechanical / Electronic
optional optional optional optional optional
Steady Governing Rate
Mechanical type≤5%,Elcctronic≤1.5%
Fuel consumption
See test data or charactertic curve
Fuel Feed Pump type
plunger type
Fuel filter type
spiral paper element
Injection timing(B.T.D.C) ° 20.5±0.5 20.5±0.5 18±0.5 18±0.5 18±0.5
Injector type
multi-hole,Valve needle
Injector opening pressue MPa 22 22 22 22 22
Solenoid, Make & Model
1756ES 1756ES 1756ES 1756ES 1756ES
Voltage V 24 or 12 24 or 12 24 or 12 24 24
Pulling Current
When voltage is 24V ,≤25A.,When voltage is 12V ,≤50A
Holding Current
When voltage is 24V ,≤0.6A.,When voltage is 12V ,≤1.2A
Intake and Exhaust system





Air consumption at Prime Power kg/h 156 229 304 421 421
Standard Power kg/h / 240 312 440 440
Max allowable Air intake restriction kPa ≤3
Max Environmental temperature ºC ≤45
Air filter type
spiral paper element
Max exhaust gas temperature after turbine ºC ≤600 ≤550 ≤550 ≤550 ≤550
Max allowable back pressure in exhaust line kPa ≤7
Exhaust gas flow at Prime Power kg/h 163 238 318 441 441
Standard Power kg/h / 251 326 462 462
Cooling system





Max. Top tank temperature ºC ≤103
Heat rejection radiation from engine at Rated Powe kW / 8 10 17 17
Heat rejection to coolant at Rated Power kW / 15 18 35 35
Radiator ambient ºC ≤45
Recommended coolant
See Operatin Manual
Radiator cooling system type
closed circuit
Radiation area of ratiatior m^2 18 20 20 30 30
Radiator core thickness


fan diameter mm Φ466 Φ466 Φ466 Φ540 Φ540
fan power consumption kW 2 2 2 4 4
fan flow m^3/min 172 172 172 220 220
coolant capacity L 15.7 15.7 19 27.6 27.6
coolant pump type
Centrifugal
Water Flow in Major Circulation m^3/h / 3.8 4.5 8.1 8.1
Max external coolant system restriction kPa ≤12
Thermostat Type
wax type
strat to open ºC 75
fully open
90
Electrical system and OTHERS





Engine Driven Charging Alternator Maker & Model
Prestolite Company
Type
Three-phase AC,commutated and voltage regulated
Power kW 0.75
System Voltage V 28V 28V 28V 28V 28V
Charging Amperes A 27A 27A 27A 27A 27A
Starter System Maker, Model
Prestolite Prestolite Prestolite Prestolite Prestolite
Type
DC,selfexcitation
Voltage
24V or 12V 24V or 12V 24V or 12V 24V 24V
Rated Power
4kW 6kW 6kW
Starting Current
800~900A 800~900A 800~900A 800~900A 800~900A
Solenoid& Model
incorporated with starter
Relay, & Model
incorporated with starter
Protection Threshold Setting Low Oil Pressure
0.12MPa(When engine speed ≥650r/min)
High Engine Temperature ºC 95 95 95 95 95
High Oil Temperature ºC 105 105 105 105 105
provisions on the flywheel housing for the installation of magnetic pickup
It is recommended to install the magnetic pichup at the flywheel gear ring with 0.4~0.8mm clearance between the pickup and the tip of the tooth
switches and sensors installation location
See the Engine Assembly Drawing
the Electrical drawing
See the Engine Electrical Drawing
Flywheel house stadard
SAE3 SAE3 SAE3 SAE1 SAE1
Flywheel type stadard
SAE11.5 SAE11.5 SAE11.5 SAE11.5 SAE11.5
Center of Gravity Location
see the engine outline drawing see the engine outline drawing see the engine outline drawing see the engine outline drawing see the engine outline drawing





Contact us if you need more details on Diesel Engine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Diesel Pump、Deutz Engine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Diesel Engine Pumps