Horizontal Multisatge High Pressure Water Pump

Model NO.: MS


Max.Capacity: 100-200 L/min


Impeller Number: Multistage Pump


Influent Type of Impeller: Single Suction Pump


Pump Casing Combined: Horizontal Split Pumps


Impeller: Closed


Advantage: High-Efficiency, Energy-Saving


Origin: China




Max.Head: >150m


Driving Type: Motor


Working Pressure: High Pressure Pump


Position of Pump Shaft: Horizontal Pump


Mounting Height: Suction Centrifugal


Usage: Circulating Pump


Trademark: Tongke


HS Code: 8413709990


Horizontal Multisatge High Pressure Water Pump for industrial

High-efficiency for Energy-saving √

Wide performance range √

Operating safety&steady √

Low noise √

Long life √

Convinent installation. √



MS type wearable centrifugal high pressure water pump is used to transport the clear water and the neutral liquid of pit water with solid grain≤ 1.5%. Granularity<0.5mm. The temperature of the liquid is not over 80º C. The temperature of the liquid is not over 80º C. The pumps are suitable for water supply and drainage in mines, factories and cities.

Note: When the situation is in the coal mine, explosion proof type motor shall be used.



Operation Parameter for Horizontal Multisatge High Pressure water Pump

Diameter	DN 85-250 mm
Capacity	25-500 m3/h
Head	60-1798m
Liquid Temperature	up to80 ºC

Application Fields for Horizontal Multisatge High Pressure water Pump

∧ Water supply & drainage for mines

∧ high buildings life water supply, fire fighting system, automatic spraying water under the water curtain, long distance water transportation, water circulation in production process, supporting the use of all kinds of equipment and various production process water, etc

∧ hotels, restaurants, entertainment refrigeration and air conditioning supply water







√ Structrual for MS series high pressure pump



This drawings is for Supported with the rolling bearing

other type supported with sliding bearing please contact with Tongke for more details.

1	Cluth part	2	shaft	3	Bearing part	4	packing gland
5	Inlet suction	6	Seal-ring	7	Middle-section	8	Impeller
9	Guide vance	10	Guide vane sleeve	11	water-sealing pipe part	12	Oult section
13	Balancing sleeve	14	Balancing disk	15	packing content	16	Bearing

Model MS pump consists of four parts, stator, rotor, bearing and shaft seal

1.Stator consists of inlet, middle and outlet sections and the guide vane etc., with the take-up bolt tightly clamping all sections to form a working room. The inlet of it stands horizontally while the outlet vertically upward.

2.Rotor consists of the shaft, impeller, balancing disk and muff etc., the shaft passes the power to the impeller to have it work; the balancing disk balances the axial force; and replaceable muff is mounted on both sides of the shaft to protect it.

3.There are rolling and sliding bearings: The rolling bearing consists of bearing seat, bearing and bearing gland and uses grease for lubrication.

The sliding bearing consists of bearing body and cover, liner, dust-proof disk, oil leveller, oil throwing ring etc., and uses thinned oil for lubrication.

4. The shaft is sealed with stuffing and the shaft seal consists of the sealing contents, stuffing, baffle. The liquid in the sealing work-room functions water-sealing, watercooling and water lubricating and the water for watersealing comes from the pressure water inside of the pump.




Quality certificate





Company Image






Service for Horizontal Multisatge High Pressure water Pump

Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.

Technical training Equipment evaluation

Installation and debugging Troubleshoot

Maintenance Update and improvement

Commitment to the service

1.One-year warranty. Provide technical support free all-life of the products.

2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.

3.Hot-line of service is available in 24h, responded in 8h.



Your call and mail is welcome at any time for our Horizontal Multisatge High Pressure water Pump

Contact	Mr Seth Chen
Telphone	0086-13817768896

Contact us if you need more details on High Pressure Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Pressure Water Pump、Pressure Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Circulating Water Pump